Zenith ZC800 Bedienungsanleitung PDF herunterladen (Seite 5)

Code Identification Feature

The Code Identification Feature allows you to identify

the 4 digit library code stored under your device key.

For example, if you want to find out what 4 digit code is

stored under your TV device key, follow the six steps

below:

1. Press and hold the SETUP button until the red

indicator stays on. Release the SETUP button.

2. Press and release the desired mode button (TV,

DVD, etc.). The red indicator blinks, then stays lit.

3. Press and release the SETUP button. The red

indicator blinks off.

4. To find the first digit for the code stored under the

mode key pressed in step 2, press each numeric key

from 0-9 in turn. When the red indicator blinks off

the number you pressed is the first digit for the code

you are searching for.

5. To find the second digit, repeat step 4, this time

when the red indicator blinks off this is the second

digit.

6. Repeat step 4 to find the third and fourth digits.

Code Search by Brand

Lets you search for a code for a specific Brand within

the Code Library for a particular manufacturer.

1. Turn on the device (TV, DVD, etc.) to be controlled.

2. Press and hold the SETUP button until the red

indicator remains on, then release SETUP button.

3. Press and quickly release the desired mode button

(TV, DVD, etc.). The red indicator blinks off once.

4. Press and release the numeric button (0-9)

corresponding to desired Manufacturer (see table on

next page). The red indicator blinks off once. Note,

pressing “0” performs a full library search same as

normal Code Search Method on previous page.

5. Press the CHANNEL UP button repeatedly until the

device to be controlled changes channel. The red

indicator blinks off with each button press. If you

accidentally overshoot the code required, press the

CHANNEL DOWN button to backtrack through the

library until the device changes channel. Pressing

CHANNEL UP changes direction to forward again.

6. Press and release MUTE to install the code.

Brand Search Method entry is now complete.

Note: When all codes under a Brand have been searched

the red indicator flashes rapidly for 3 seconds.

Setup, cont.Setup, cont.

Most users will store DVD codes under the DVD button,

Cable codes under CBL, etc. If (for example) you want to

store a VCR code under CBL, first follow the procedure

for Direct Code Entry (previous page) and press CBL in

step 2 of Direct Code Entry, then enter ANY VCR code in

step 3 of Direct Code Entry. Then follow the steps above

for Code Search (or Brand Search, below). Note: If the

device does not have a CHANNEL UP button, use

PLAY (VCR only) or POWER instead. Code Search

starts from the currently stored 4 digit number under

that mode.

1 RCA, GE, SA

2 Zenith

3 Philips, Magnavox

4 Sony, Panasonic, Toshiba, Sharp, Pioneer

5 LG, Samsung, Hitachi, JVC, Sanyo

6 Echostar, Sylvania, Dish, Emerson, Fisher, Hughes

0 All

1 2 3 4 5 6 7 8 9 10 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

Zenith ZC800 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen Zenith ZC800